The practice of using veneers is popular in America even though this procedure is not widely taught in the dental schools. These procedures are usually successful, but caution needs to be exercised that they are used in the procedures of diagnosis. Other diagnostic options include direct bonding, traditional orthodontics, bleaching and esthetic recontouring. The information here will guide you through the no prep veneers Houston procedures.
The first thing that a dentist does is to get the ones that fit for the patient. The way this is done is by trying them without using paste for easy fitting. Once the dentist has ascertained that each fits well, the next thing that he does is to try the units together and check the contact. For this procedure try-in cement will be used to hold them in place. Once this is done, one is then given a mirror to check how they look on them and tell whether they are comfortable.
In the next procedure, the paste is made to be water soluble and in this way, rinsing the internal elements left on the teeth by the veneers is easy. The dentist will mix some liquid consepsis with pre-prepared pumice and apply it on the teeth to clean them. This is followed by air drying of the teeth.
The procedure that follows this is etching of the teeth with phosphoric acid of 37% concentration for about 15 seconds. This is then rinsed off, and the teeth are left to dry. The picture that one gets, in this case, is frosty that is associated with the etching enamel. The dentist will then prepare a thin layer of a scotch bond adhesive and places it using a micro brush.
The next step entails the translucent veneer cement being placed inside the veneer and the veneer placed on the tooth, making sure that the extra cement can be seen around all the borders. If for instance, there is n extra cement that comes out of the gingival margin while setting the veneer, the dentist will quickly remove the veneer and add more cement so that excess cement squirts out of the margin. Each of the veneers is usually done in a similar way with the #8 and # 9 central incisors placed concurrently.
After this is done, the LED emetron light is passed back and forth over the veneer being held at a distance of 5-7 mm for a period of 5 seconds. This procedure turns the cement into a gel but it does not cure it completely.
Upon the cleaning up of the gingival margin, light is placed on its tissues and margins halfway in order to complete the curing process and to hold everything together in place. Flossing is then done in order to clear the excess cement before it cures completely.
Once the cement is cleaned up, the curing process is then completed. The most important parts when it comes to the successful completion of the process and esthetic cases are the centrals, and as such, they are the first to get a place.
The first thing that a dentist does is to get the ones that fit for the patient. The way this is done is by trying them without using paste for easy fitting. Once the dentist has ascertained that each fits well, the next thing that he does is to try the units together and check the contact. For this procedure try-in cement will be used to hold them in place. Once this is done, one is then given a mirror to check how they look on them and tell whether they are comfortable.
In the next procedure, the paste is made to be water soluble and in this way, rinsing the internal elements left on the teeth by the veneers is easy. The dentist will mix some liquid consepsis with pre-prepared pumice and apply it on the teeth to clean them. This is followed by air drying of the teeth.
The procedure that follows this is etching of the teeth with phosphoric acid of 37% concentration for about 15 seconds. This is then rinsed off, and the teeth are left to dry. The picture that one gets, in this case, is frosty that is associated with the etching enamel. The dentist will then prepare a thin layer of a scotch bond adhesive and places it using a micro brush.
The next step entails the translucent veneer cement being placed inside the veneer and the veneer placed on the tooth, making sure that the extra cement can be seen around all the borders. If for instance, there is n extra cement that comes out of the gingival margin while setting the veneer, the dentist will quickly remove the veneer and add more cement so that excess cement squirts out of the margin. Each of the veneers is usually done in a similar way with the #8 and # 9 central incisors placed concurrently.
After this is done, the LED emetron light is passed back and forth over the veneer being held at a distance of 5-7 mm for a period of 5 seconds. This procedure turns the cement into a gel but it does not cure it completely.
Upon the cleaning up of the gingival margin, light is placed on its tissues and margins halfway in order to complete the curing process and to hold everything together in place. Flossing is then done in order to clear the excess cement before it cures completely.
Once the cement is cleaned up, the curing process is then completed. The most important parts when it comes to the successful completion of the process and esthetic cases are the centrals, and as such, they are the first to get a place.
About the Author:
To benefit from no prep veneers Houston dental patients are advised to use this excellent clinic. Make an appointment now through this website http://tophoustoncosmetic.dentist.
0 comments:
Post a Comment