Billiards is a popular past-time game that is found in many homes. The material that is most commonly used for making it is slate. It is a good choice because it is resilient and attractive. This is in addition to the fact that it produces durable outcomes. Even though the material is durable, it is bound to experience wear and tear over time. In consideration of billiards repair Denver residents can consider the services of professionals. It is however important to know how to go about general repairs.
The wear and tear of the table is experienced through cracks in the slate below the felt. There are a number of tips that are useful when it comes to repair of billiards and restoring it back to its condition. Repairs are better attended to after separating the felt and the table. In so doing, the repairs will be done in a more comprehensive manner. A socket wrench will be required for this exercise. It is used to remove the bolts that attach the rails to the table.
After the rails are removed, the staples which attach the felt to the table are removed. A staple puller is the best tool for this though a screwdriver may also be used. The screwdriver should have a flat head. The staples that have been removed should be put aside carefully so that they are not misplaced. Besides, they are likely to cause injury if stepped upon.
The extent of the cracks is known through inspection of the slate. Beeswax will suffice to fill the fine cracks and small chips. It should be held above the crack, some 4 inches, as the wax is melted. The melting is done using a portable propane torch. The wax is left to drip into the cracks.
Slate needs plenty of wax for it to effectively bond. After the wax cools properly, any excess ones are removed using a paint scraper. The excess wax is removed because it would leave the slate with an unpleasant appearance. Furthermore, it may have an effect on the drying of the wax within the cracks. The right quantity of wax is important so that it dries and grips the cracks well.
There is the option of using billiard table wax. This contains resin that hardens in a better way than beeswax and gives more durable results. If the cracks are big, then billiards wax will be the better option. After the application is completed and the excess wax is scraped, the slate is wiped with a damp sponge or cloth. Billiard table wax will also be effective when one has to seal loose seams on the slate.
For even more extensive cracks, slate repair glue is used. It is thick and consistent, features that make it able to effectively bond slate. The glue is applied inside the cracks on both sides. The separate sides are then firmly pushed together. For the glue to bond the separate slate pieces, they are held together for some time.
The pressure that results from the slate being pushed together makes some glue to seep out. It ought to be left to dry. After that, it is smoothed using sandpaper. The felt is put back in position after all repairs are done.
The wear and tear of the table is experienced through cracks in the slate below the felt. There are a number of tips that are useful when it comes to repair of billiards and restoring it back to its condition. Repairs are better attended to after separating the felt and the table. In so doing, the repairs will be done in a more comprehensive manner. A socket wrench will be required for this exercise. It is used to remove the bolts that attach the rails to the table.
After the rails are removed, the staples which attach the felt to the table are removed. A staple puller is the best tool for this though a screwdriver may also be used. The screwdriver should have a flat head. The staples that have been removed should be put aside carefully so that they are not misplaced. Besides, they are likely to cause injury if stepped upon.
The extent of the cracks is known through inspection of the slate. Beeswax will suffice to fill the fine cracks and small chips. It should be held above the crack, some 4 inches, as the wax is melted. The melting is done using a portable propane torch. The wax is left to drip into the cracks.
Slate needs plenty of wax for it to effectively bond. After the wax cools properly, any excess ones are removed using a paint scraper. The excess wax is removed because it would leave the slate with an unpleasant appearance. Furthermore, it may have an effect on the drying of the wax within the cracks. The right quantity of wax is important so that it dries and grips the cracks well.
There is the option of using billiard table wax. This contains resin that hardens in a better way than beeswax and gives more durable results. If the cracks are big, then billiards wax will be the better option. After the application is completed and the excess wax is scraped, the slate is wiped with a damp sponge or cloth. Billiard table wax will also be effective when one has to seal loose seams on the slate.
For even more extensive cracks, slate repair glue is used. It is thick and consistent, features that make it able to effectively bond slate. The glue is applied inside the cracks on both sides. The separate sides are then firmly pushed together. For the glue to bond the separate slate pieces, they are held together for some time.
The pressure that results from the slate being pushed together makes some glue to seep out. It ought to be left to dry. After that, it is smoothed using sandpaper. The felt is put back in position after all repairs are done.
About the Author:
If you are looking for information about billiards repair Denver residents should pay a visit to our web pages online here today. Additional details are available at http://www.americanbilliardsservice.com now.
0 comments:
Post a Comment